Caring for your created products:

 Here are some tips for caring for sublimation and vinyl shirts:

• Wash Use cold water and a mild detergent. Turn the shirt inside out and wash with similar colors. Avoid bleach, fabric softeners, and harsh chemicals. 
• Dry Hang dry is best, but you can also tumble dry on low heat. Hanging dry helps minimize wrinkles. 
• Iron Use a cool setting. 
• Store Fold neatly and store in a cool, dry place. Use wide or padded hangers if you need to hang the shirt. 
• Avoid Stretching, pulling, or creasing the print area. Keep sharp objects away from the fabric. Don't dry clean. 
• Let it sit Before washing, allow 24–48 hours for the vinyl adhesive to bond with the fabric. This helps prevent peeling, cracking, or lifting. 

 Here are some tips for caring for a vinyl tumbler or cup:

• Hand wash: Vinyl-decorated drinkware is usually not dishwasher safe and should be washed by hand. 
• Avoid heat: Excessive heat can damage the vinyl. Don't microwave the tumbler and avoid leaving it in a hot car. 
• Avoid harsh scrubbing: Scrubbing too hard can damage the vinyl.

 Here are some tips for applying a vinyl decal to a car window: 

• Clean the glass: Make sure the window is clean and dry before applying the decal. Avoid using window cleaner, as it can leave a residue.
• Measure the surface: Measure the decal and the surface you're applying it to, especially for large decals.
• Use masking tape: Use masking tape to help position the decal.
• Use soapy water: For large decals, you can use a mixture of a few drops of dish soap and water in a spray bottle to help reposition the decal.
• Apply in natural light: Apply the decal in natural light.
• Use a hair dryer: Use a hair dryer on low heat to remove air bubbles.
• Let it set: After applying the decal, leave it and the surface tape in place for at least 24 hours.
• Remove the decal: To remove the decal, start peeling from one corner. Use rubbing alcohol to remove any residue.